Crane LED Design

LED Design for Overhead Crane

Cranes have changed a lot in the past few decades. Although some operators still adhere to the original operation mode on lifting equipment that has been used for many years, some people have taken a step ahead and learned to use the advantages of the latest crane technology.

Fortunately, you do not need to buy an overhead bridge crane again to benefit from the latest technology. Next, we look at two simple, cost-effective, small-scale retrofits that will make your  existing cranes safer, more efficient, and lower operating costs, even if your crane has been around for decades.

LED Design for Overhead Crane
LED Design for Overhead Crane

LED lighting upgrade
Can make your crane safer
At the same time, you save up to 80% in energy costs
and this is one of the quickest and most economical methods

Because of the lack of overhead light in the factory, which is often blocked by cranes, industrial cranes are usually equipped with lighting facilities. Standard cranes equipped with incandescent lamps, high-pressure sodium lamps or halogen lamps are helpful for lighting, but due to the divergence of the light emitted from them, the operator of the crane from the side can easily look directly at the lights, weakening the s/he seeing the lifting of the goods. vision.

LED lighting is different. Their high concentration of light greatly reduces the risk of blinding by operating lights, making it easier for operators to focus their attention on lifting goods and avoid obstacles. Moreover, like traditional types of lighting, LED lamps do not require long (up to 20 minutes) cooling before restarting. You can turn it off as needed. When you replace the existing lighting equipment on the standard 10-ton industrial crane with LED lamps, you can save up to 80% of the energy consumption for the crane. In general, the maximum power motor is a hoist motor, and the hoist motor is not continuously driven, so most of the energy consumption is in lighting facilities. Large cranes can also save 40-50% of the energy costs of the entire crane.

Overhead Crane with LED
Overhead Crane with LED

Other benefits: LED lights are instantly lit, long life, and do not need to be replaced as frequently as traditional lighting. At present, the new generation of LED lamps have a service life of up to 10 years under normal use. In contrast, standard lighting is more easily damaged by vibration and normal use, and it may need to be replaced every two to four years.

Refitting a crane with LED lighting is quite simple. If the crane is already equipped with lighting, just replace the light elements and switches. Due to the low energy consumption of LEDs, existing transformers are usually sufficient. If the crane is not currently equipped with lighting facilities, Ellsen can provide transformers, relays and all necessary components as well as installation instructions. Either way, replacements and upgrades usually take less than a day. If you do not want to replace it yourself, Ellsen technicians can help.

Crane with Remote Control
Crane with Remote Control

Remote upgrade
A simple ergonomic change
You can change your crane and workflow

How many of us get up to tune in the television channel? Running out. We use an easy-to-use remote control on our comfortable sofa or recliner. However, tens of thousands of cranes all over the world are still using communicators to control equipment. The operator must leave the Communicator position to operate the load and then move back to the Communicator position to move the load – coming and going back and forth numerous times a day.

If your operator can use the remote control at any time, how long can he save? More importantly, the remote control provides the operator with the safest way to operate the crane and the best field of view without being limited by the length of the communicator cable or the position of the mobile.

Crane Factory with Ellsen New Crane Design
Crane Factory with Ellsen New Crane Design

The operator can make faster, better and safer choices and move the crane to the best position. In some cases, the remote control can help the operator to perform certain tasks independently without the need for operators and assemblers to work together. When the plant crane covers a long period of time (sometimes 100 meters or more), the advantages of the remote control are even more pronounced.

Most standard cranes can complete remote control conversions in one day or less. The Ellsen CXT crane’s remote control and communicator use the same plug, so the upgrade plan is very simple. Ellsen can also modify remote controls for cranes with single and double hoists manufactured by other crane manufacturers, such as standard cranes, heavy-duty cranes and fine-manipulated cranes.

Each manager has the best understanding of the operation processes and processes of his factory
Why don’t you think about the efficiency of these two upgrades for your work?
What impact will it have?
It can be said with certainty
If you try to use LED lights or remote control on the crane
Then you will get the benefits of energy saving and safer
And there are opportunities to increase your productivity

Crane Working Enhancing Tips

Ellsen Electromagnetic Crane for Sale

How to make the crane equipment to perform its maximum efficiency

With the increasing degree of lifting mechanization, the wide application of equipment not only accelerates the construction progress but also improves the quality of the construction.Since the  lifting equipment is affected by various factors during the daily use, the performance of the equipment cannot be fully played.What should we pay attention to in our daily construction to maximize the performance of the equipment?

The construction unit shall make good rules and regulations for the equipment manager, and maintain the normal construction order of the unit. Especially for the units with the frequent mobilization of equipment and personnel, a sound management system material shall be established.

Ellsen 25ton double girder overhead crane for sale
25 ton double girder overhead crane for sale

Crane manufacturers should supervise relevant staff to carry out the maintenance and repair system and safety operation rules, so as to ensure the safety and reliability of the equipment and personnel.In the equipment management, many units often have the concept of heavy use and light maintenance, which will easily bury the safety hazard to the equipment.

The operation of the hoisting equipment is not standardized, which will aggravate the wear and aging of the equipment.Some units still employ nonqualified drivers, which not only cause early damage to the equipment but also seriously delay the normal construction period.

In order to make the equipment most effective in the long run, besides the daily maintenance work, we also need to pay attention to the replacement and repair of equipment damaged parts, which can be eliminated at the beginning of the failure and avoid the safety threat to the construction workers.

Ellsen Heavy Duty Crane for Sale
Ellsen Heavy Duty Crane for Sale

There are uncertainties in the future of heavy equipment. With the development of social economy, the scale of production is expanding, and the degree of automation products is higher and higher. Crane is widely applied in the modern production process, and the application area is also widespread.One of the key development priorities of many industrial developed countries is the lifting of heavy transport technology.Analysis of development situation in 2011 lifting transportation equipment, “NPC and CPPCC” during the hot topic of concern in the heavy machinery industry is for stability, in the relatively stable market environment, should be on the basis of this, to improve the quality of hoisting equipment, in a stable domestic sales at the same time, should also be to expand the overseas market.Crane is the basic equipment of the construction industry and manufacturing industry. In recent years, the country has made great efforts to develop infrastructure construction, and all of them need a lot of high quality.

General bridge crane working situation

Single beam crane is widely used in factories, warehouses, materials and other occasions to lift goods, and it is forbidden to be used in the flammable, explosive and corrosive medium.

There are two forms of operation on the ground and in the air.The ground operation has two kinds of handle operation with line handle and the handle of the remote control. The air operation refers to the operation of the driver’s room.There are two kinds of the cab, open and closed, which can be divided into the left or right side installation according to the actual situation. The two forms have two kinds of entry direction: side and end, so as to meet users’ needs under different needs.

Single Girder traveling crane for sale
Single Girder traveling crane for sale

Single beam crane is widely used in machinery manufacturing workshop, metallurgical workshop, petroleum, petrochemical, port, railway, civil aviation, power station, paper making, building materials, electronics and other industries workshop, warehouse, material yard, etc.It has the advantages of compact shape, the low height of building clearance, light self-weight, small wheel pressure and so on.

Please leave your message below and we will reply to you as quickly as possible.
* Your Name

* Your Email

Your Country

Your Phone Number (Include the area code)

* Basic Info

* Your Additional Requirement

Crane Selection Reference

Homemade crane service

What are the problems that should be paid attention to when buying a crane?

Nowadays, the economic development is booming, and more large machines need more services for social development. The cranes here are more outstanding. So, how can we to buy a correct and reliable overhead crane? Today, Ellsen Overhead Bridge Crane Factory will give you a detailed description of the problem of buying a crane.

100t overhead ladle crane for sale


It is necessary to buy the actual needs of your own

Not the most expensive is the best must master this principle.It is the right choice that should stick to your needs. Nowadays many crane models emerge from time to time in, like double beam bridge crane, electromagnetic crane, grab crane, electric hoist, crane hook crane, portable gantry crane and so on. It was different in nature, so the performance is more and more within the play a greater effectiveness, therefore I must choose according to their actual needs.

Best choice of the famous products of the regular enterprise

When purchasing crane, you must pay attention to choose the realiable crane manufacturer, because the value of these items is higher, so more and more crane manufacturers are emerging up, but also will affect the progress of the work, resulting in delays, will bring serious damage to your purchasing project, so in order to ensure the quality and performance of guarantee required, you should buy crane through formal channels, such as the direct purchase manufacturers, designated dealers of manufacturers, the official website of the enterprises.

Single Girder traveling crane for sale
Single Girder traveling crane for sale


The way to choose and buy the crane must be regular

When purchasing crane, you must pay attention to where the crane is manufactured, because the value of these items is higher, so the problem of wealth loss is serious, but also will affect the progress of the work, resulting in delays, will bring serious damage to my project, so in order to ensure the quality and performance of guarantee required, you should buy the crane through formal channels. There are more manufacturers running direct purchase, manufacturers designated dealers, and you can also buy it through the official website of the enterprise.

garage overhead crane installation
garage overhead crane installation


Pay attention to your own funding

Now the price of the crane is very high, so each one of them is very expensive, so you must take it seriously. Thus, when you buy crane you should consider it from your actual consumption level, can not blindly pursue brand without taking into account your consumption ability.
When you buy cranes, you must pay attention to the above effective notices, so that you can better ensure that you choose more high-quality crane products, providing efficient services for you, improving your working quality.

Any detailed information or suggestion you need from our crane factory, welcome contact us.

Please leave your message below and we will reply to you as quickly as possible.
* Your Name

* Your Email

Your Country

Your Phone Number (Include the area code)

* Basic Info

* Your Additional Requirement